TM401

TM401

Automate for repeatable quality, greater output, lower cost, and improved HSE

  • Single-pass flush (large-radius) weld profiling of inside and outside girth welds in wind turbine support structures at a rate of 30-60 meters/hour
  • Programmed and CNC-quality profiling and surface finish across weld geometries, including off-sets and thickness transitions
  • Storage-to-seam deployment and section-to-section transfer in 15 minutes. Seam-to-seam transfer in 5 minutes
  • Dust-free, low-noise and supervision-only operation
  • The TM401 weld profiling robot system is field-proven and was developed in collaboration with monopile and tower producers in Europe.
  • Replacing weld grinding with machining has been recognised by DNV as more advanced, with machining requiring removal of material only to 0.2 mm below undercuts (DNV-RP-C203 section 7.3.2).
Home
Capex and Opex